All information products included in https://us-cert.cisa.gov/ics are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.
1. EXECUTIVE SUMMARY
- CVSS v3 8.3
- ATTENTION: Exploitable remotely/low attack complexity
- Vendor: Mitsubishi Electric
- Equipment: Mitsubishi Electric, Factory Automation products
- Vulnerability: Path Traversal
2. UPDATE INFORMATION
This updated advisory is a follow-up to the advisory update titled ICSA-20-212-03 Mitsubishi Electric Factory Automation Products Path Traversal (Update A) that was published January 14, 2021, to the ICS webpage on us-cert.cisa.gov.
3. RISK EVALUATION
Successful exploitation of this vulnerability may allow an attacker to obtain unauthorized information, tamper the information, and cause a denial-of-service condition.
4. TECHNICAL DETAILS
4.1 AFFECTED PRODUCTS
The following products and versions are affected:
- CW Configurator,Versions 1.010L and prior
- FR Configurator2, Versions 1.22Y and prior
- GX Works2, Versions 1.595V and prior
- GX Works3, Versions 1.063R and prior
--------- Begin Update B Part 1 of 2 ---------
- MELSEC iQ-R Series Motion Module, Versions 10 and prior
--------- End Update B Part 1 of 2 ---------
- MELSOFT iQ AppPortal, Version 1.17T and prior
- MELSOFT Navigator, 2.70Y and prior
- MI Configurator, all versions
- MR Configurator2, Version 1.110Q and prior
- MT Works2, Versions 1.156N and prior
- MX Component, Version 4.20W and prior
- RT ToolBox3, Versions 1.70Y and prior
4.2 VULNERABILITY OVERVIEW
4.2.1 PATH TRAVERSAL CWE-22
Multiple Mitsubishi Electric Factory Automation products have a vulnerability that allows an attacker to execute arbitrary code.
- CRITICAL INFRASTRUCTURE SECTORS: Critical Manufacturing
- COUNTRIES/AREAS DEPLOYED: Worldwide
- COMPANY HEADQUARTERS LOCATION: Japan
Mashav Sapir of Claroty reported this vulnerability to CISA.
Mitsubishi Electric recommends the following mitigations:
Download the latest version of each software product and update. The fixed software products and versions are as follows:
- CW Configurator, Version 1.011M or later
- FR Configurator2, Version 1.23Z or later
- GX Works2, Version 1.596W or later
- GX Works3, Version 1.065T or later
--------- Begin Update B Part 2 of 2 ---------
- MELSEC iQ-R Series Motion Module, Version 12 and later
-------- End Update B Part 2 of 2 ---------
- MELSOFT iQ AppPortal, Version 1.20W or later
- MELSOFT Navigator, Version 2.74C or later
- MR Configurator2, Version 1.115V or later
- MT Works2, Version 1.160S or later
- MX Component, Version 4.21X or later
- RT ToolBox3, Version 1.80J or later
For users of a product that has not released a fixed version or who cannot immediately update the product, Mitsubishi Electric recommends taking the following mitigation measures to minimize risk:
- Make sure the file is obtained from the correct acquisition route when receiving a project file or a configuration data file from another person via email, USB memory, file server, etc.; or check that there is no file of unknown source.
- Operate the products under an account that does not have administrator privileges. Except for MELSEC iQ-R Series Motion Module.
- Install an antivirus software in computers using the products. Except for MELSEC iQ-R Series Motion Module.
- Restrict network exposure for all control system devices or systems to the minimum necessary and ensure they are not accessible from untrusted networks and hosts.
- Locate control system networks and remote devices behind firewalls and isolate them from the business network.
- Use virtual private network (VPN) when remote access is required.
Additional information about the vulnerability or Mitsubishi Electric's compensating control is available by contacting a Mitsubishi Electric representative.
CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
CISA also provides a section for control systems security recommended practices on the ICS webpage on us-cert.cisa.gov. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Additional mitigation guidance and recommended practices are publicly available on the ICS webpage on us-cert.cisa.gov in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to CISA for tracking and correlation against other incidents.
CISA also recommends users take the following measures to protect themselves from social engineering attacks:
- Do not click web links or open unsolicited attachments in email messages.
- Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
- Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
No known public exploits specifically target this vulnerability.
For any questions related to this report, please contact the CISA at:
Toll Free: 1-888-282-0870
CISA continuously strives to improve its products and services. You can help by choosing one of the links below to provide feedback about this product.
Please share your thoughts.
We recently updated our anonymous product survey; we'd welcome your feedback.