All information products included in https://us-cert.cisa.gov/ics are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.
1. EXECUTIVE SUMMARY
- CVSS v3 3.3
- ATTENTION: Low skill level to exploit
- Vendor: Pilz GmbH & Co. KG (Pilz)
- Equipment: PNOZmulti Configurator
- Vulnerability: Clear-text Storage of Sensitive Information
2. RISK EVALUATION
Successful exploitation of this vulnerability could allow sensitive data to be read from the system.
3. TECHNICAL DETAILS
3.1 AFFECTED PRODUCTS
The following versions of PNOZmulti Configurator, a safety circuit configuration tool, are affected:
- PNOZmulti Configurator all versions prior to 10.9
The vulnerability within the PNOZmulti Configurator directly impacts the PMI m107 diag HMI device.
3.2 VULNERABILITY OVERVIEW
An authenticated attacker with local access to the system containing the PNOZmulti Configurator software can view sensitive credential data in clear-text. This sensitive data is applicable to only the PMI m107 diag HMI device. An attacker with access to this sensitive data and physical access to the PMI m107 diag can modify data on the HMI device.
- CRITICAL INFRASTRUCTURE SECTORS: Multiple
- COUNTRIES/AREAS DEPLOYED: Worldwide
- COMPANY HEADQUARTERS LOCATION: Germany
Gjoko Krstikj of Applied Risk reported this vulnerability to NCCIC.
Pilz has discontinued the PMI m107 diag HMI device and the function concerned was removed in PNOZmulti Configurator Version 10.9.
Pilz recommends the following mitigations depending on use of the PMI m107 diag HMI device:
Users that do not use the PMI m107 diag:
- Install Version 10.9 of the PNOZmulti Configurator software and delete the content of the directory C:\Program-Data\Pilz\PNOZmulti Configurator v<version>\AppData\pmimicroconfig. (Replace <version> with the used version.)
Users that still use the PMI m107 diag:
- Continue to use the old PNOZmulti Configurator software version and secure the PC and the file system against unauthorized access.
For more information, the Pilz security advisory can be viewed at the following link:
NCCIC reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
NCCIC also provides a section for control systems security recommended practices on the ICS-CERT web page. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Additional mitigation guidance and recommended practices are publicly available on the ICS-CERT website in the Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.
Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to NCCIC for tracking and correlation against other incidents.
NCCIC also recommends that users take the following measures to protect themselves from social engineering attacks:
- Do not click web links or open unsolicited attachments in email messages.
- Refer to Recognizing and Avoiding Email Scams for more information on avoiding email scams.
- Refer to Avoiding Social Engineering and Phishing Attacks for more information on social engineering attacks.
No known public exploits specifically target this vulnerability. This vulnerability is not exploitable remotely.
For any questions related to this report, please contact the CISA at:
Toll Free: 1-888-282-0870
CISA continuously strives to improve its products and services. You can help by choosing one of the links below to provide feedback about this product.