All information products included in https://us-cert.gov/ics are provided "as is" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://www.us-cert.gov/tlp/.
This updated advisory is a follow-up to the updated advisory titled ICSA-16-147-01A Environmental Systems Corporation Data Controllers Vulnerabilities that was published June 2, 2016, on the NCCIC/ICS-CERT web site.
Independent researcher Maxim Rupp has identified data controller vulnerabilities in the Environmental Systems Corporation (ESC) 8832 Data Controller. ESC acknowledged that Balazs Makany reported these vulnerabilities on February 18, 2015. ESC has stated the ESC 8832 Data Controller has no available code space to make any additional security patches; so, a firmware update is not possible. ESC has released an advisory that identifies compensating controls to reduce risk of exploitation of the reported vulnerabilities.
These vulnerabilities could be exploited remotely.
An exploit that targets these vulnerabilities is publicly available. A Metasploit module has been released that allows an attacker to hijack a valid session that is in progress by a legitimate user.
The following ESC 8832 Data Controller versions are affected:
- ESC 8832 Version 3.02 and earlier versions.
Successful exploitation of these vulnerabilities may allow attackers to perform administrative operations over the network without authentication.
Impact to individual organizations depends on many factors that are unique to each organization. ICS-CERT recommends that organizations evaluate the impact of these vulnerabilities based on their operational environment, architecture, and product implementation.
ESC is a US-based company that maintains offices in Austin, Texas.
The affected products, ESC 8832 Data Controller Versions 3.02 and earlier, are web-based SCADA systems. According to ESC, the 8832 Data Controller is deployed in the Energy Sector. ESC estimates that these products are used primarily in the United States.
--------- Begin Update B Part 1 of 1 --------
The authentication process can be bypassed allowing unauthorized configuration changes to be made to the device because of incorrect implementation of the sessions.
--------- End Update B Part 1 of 1 ----------
The device supports different accounts with distribution of system privileges. An attacker can gain access to functions, which are not displayed in the menu for the user by means of brute force of a parameter.
These vulnerabilities could be exploited remotely.
EXISTENCE OF EXPLOIT
There is a publicly available Metasploit module that allows an attacker to hijack a valid session.
An attacker with a low skill would be able to exploit these vulnerabilities.
ESC’s recommendation for mitigation is to upgrade the device. Alternatively, block Port 80 with a firewall in front of the device. Another alternative is to educate operators and users to not use the web interface for device management, because there are other means to manage the device. A security advisory is available to ESC users on the ESC support web site (login required):
ICS-CERT recommends that users take defensive measures to minimize the risk of exploitation of these vulnerabilities. Specifically, users should:
- Minimize network exposure for all control system devices and/or systems, and ensure that they are not accessible from the Internet.
- Locate control system networks and remote devices behind firewalls, and isolate them from the business network.
- When remote access is required, use secure methods, such as Virtual Private Networks (VPNs), recognizing that VPNs may have vulnerabilities and should be updated to the most current version available. Also recognize that VPN is only as secure as the connected devices.
ICS-CERT reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.
ICS-CERT also provides a section for control systems security recommended practices on the ICS-CERT web page. Several recommended practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.
Additional mitigation guidance and recommended practices are publicly available in the ICS‑CERT Technical Information Paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies, that is available for download from the ICS-CERT web site.
Organizations observing any suspected malicious activity should follow their established internal procedures and report their findings to ICS-CERT for tracking and correlation against other incidents.
- a. CWE-287: Improper Authentication, http://cwe.mitre.org/data/definitions/287.html, web site last accessed December 22, 2016.
- b. NVD, http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-4501, web site last accessed December 22, 2016.
- c. CVSS Calculator, https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N, web site last accessed December 22, 2016.
- d. CWE-264: Permissions, Privileges, and Access Controls, http://cwe.mitre.org/data/definitions/264.html, web site last accessed May 26, 2016.
- e. NVD, http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-4502, web site last accessed June 02, 2016.
- f. CVSS Calculator, https://www.first.org/cvss/calculator/3.0#CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N, web site last accessed May 26, 2016.
For any questions related to this report, please contact the CISA at:
Toll Free: 1-888-282-0870
CISA continuously strives to improve its products and services. You can help by choosing one of the links below to provide feedback about this product.